Tekla Tedds (For Businesses) | Tekla Download

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

This page summarizes the new features and improvements in Tekla Structures versions and service packs between Tekla Structures SP6 ntoes Note that this page is a summary and does not replace the release notes, and that some service packs only have the fix list. Follow the links on the page to read the full release notes content of a Tekla Structures version and service pack. This page is updated when a new Tekla Tekla structures 2017 release notes free version or service pack is released.

Release tekla structures 2017 release notes free – Tekla Structures SP6. Release notes – Tekla Structures SP5. Release notes – Tekla Structures SP4. In Drawing content managerthe column sorting is now cumulative. Now you can save and load base point settings in the Base point dialog box.

The automatic attachment of rebar set bars to concrete parts has been improved. This error has been fixed in Tekla Structures SP4 version. The SP3 version is not available in Tekla Downloads anymore. We recommend installing the SP4 version. Release notes – Tekla Structures SP2. Clash check manager has several improvements. For example, it is now possible to check clashes between reference models and components, use a negative value for the minimum distance, and use the set Tekla Structures units as the minimum distance.

The automatic bar parenting algorithm for rebar sets has been improved for cases where bars are inside more than one concrete part. The IFC4 Export dialog box contains a new Cast-in-place export dropdown, which allows you to select more precisely what to include in the cast-in-place export.

You can now refresh the selected reference model. The reference model list now supports saving of empty reference model groups. You can now insert multiple point clouds at tekla structures 2017 release notes free.

Text rendering is faster now in drawing FOG rendering. Drawing mark content text tekla structures 2017 release notes free now loaded correctly in all user interface languages.

The dimensioning method Filter has a new Only objects on the selected sides check box in rule creation allowing you to only dimension objects that are on a certain side of the main part. Export Unitechnik 79 : There are improvements in exporting meshes. Release notes – Tekla Structures SP1. Clash check between point clouds and pour objects is now supported.

Relabel section views is a new drawing macro for updating section view labels. Relabel detail views is a new drawing macro for updating detail view labels. New fabrication drawings – create single-part, assembly and cast unit drawings more efficiently. The new Create fabrication drawing functionality allows you to create drawings by using saved settings predefined for different model objects, or by using existing drawings in telease model as templates.

New reinforcement object type – rebar assembly. Tekla Structures introduces rebar assemblya reinforcement object type that combines together any reinforcement object types.

Rebar assemblies are useful when you model reinforcement cages or custom meshes that will be prefabricated, for example. The rebar assembly srructures commands can be found on the Rebar ribbon tab, under Assembly. You can now create drawings for rebar assemblies with the new Create fabrication fre command, define view-specific rebar assembly representation settings on the Rebar assembly tab in drawing view properties, and add assembly position in reinforcement marks and associative notes.

Updated spacing settings and other reinforcement improvements. Tekla Structures comes with updated spacing settings, curved leg surfaces, performance improvements, and some new properties for rebar sets. For reinforcement objects, the Inquire center of gravity command can now be used, and many property panes have been partly rearranged. There are also improvements in Rebar shape manager. New rendering modes for reference models.

You can now control the reference model and overlay model visualization separately from parts and components. Use tekla structures 2017 release notes free new commands on gree ribbon: References wireframeReferences shaded citrix recevier downloadReferences grayscaleReferences renderedor Show only selected reference.

New way to control pour unit visibility in Organizer. You can now control in Organizer whether pour units or cast-in-place cast units are used as the highest cast-in-place hierarchy level in Organizer. Changes in managing Tekla Structures.

Some of the general settings used for managing Tekla structures 2017 release notes free Structures have been changed in version Modeling improvements. Tekla Structures comes with many enhancements related to modeling, for example:. The autosave interval for model changes is now based on time, not on the number of commands as previously.

Visualization of the bolts has been improved. Default value for top-in-form face. New material information file for Trimble Connect Visualizer. Improvements in the rwlease catalog. When you select a shape in the Shape adobe animate cc html5 video or Select shape dialog box, you can now see a preview of the selected shape in the upper right corner of the dialog box.

In the preview, you can zoom in and out by scrolling with the mouse wheel, rotate the shape using the left mouse button, pan using the middle nootes button, and adjust the viewing angle using the right mouse button.

Drawing improvements. Tekla Structures introduces new functionality, structure, and changes in rendering, snapping, zooming, handling view frames, accessing property dialog boxes, hatches, dimensioning and dimensioning performance, Document manager2D Libraryrebar pull-outs and marking, rebar group marking, layout names, handling non-solid lines, and handling fonts.

IFC improvements. In Tekla Structures versionyou have better control over IFC entities, and you tekla structures 2017 release notes free filter the objects that you want to include in the IFC4 export. Defining the property sets for the IFC export is now easier and more reliable due to the improvements in the property set definition dialog box and functionality.

Bridges are now supported in the IFC4 export. Interoperability improvements. Tekla Structures introduces new features, improvements and other changes stuctures NC file DXF converter, Trimble Connector, Tekla PowerFab export, Trimble Connect Visualizer, reference models and reference model performance, rebar set export, and point cloud properties.

Also direct links to analysis and design software have been updated. Updates in tools for automated precast fabrication. Improvements in tekla structures 2017 release notes free. There are several improvements in concrete components and tekla structures 2017 release notes free components in Tekla Structures Improvements in Template Editor, templates, and reports.

There are several improvements in separators, and enhancements in extending and trimming operations. Also, it is now possible to have 32nd and 64th precision in templates, reports, marks and dimensions in imperial units. Tooltip improvements. Tooltips for some of the frequently used ribbon commands, both in the modeling and in the drawing mode, now include example images. Changes in advanced tekla structures 2017 release notes free.

In Tekla Structures versionthere are some new advanced options, and some of the advanced options have been deprecated. Also, the functionality of some of the advanced options has been changed. Changes in template attributes. Tekla Structures introduces some new and improved template attributes. Administrator’s release notes: Reorganization of folders in the Tekla Re,ease installation folder.

Tekla Structures includes some changes that are not compatible with previous versions. These changes relfase you to take action when you upgrade Tekla Structures. The folders in the Tekla Structures installation folder have been reorganized to enable easier packaging of the product and new methods of delivering content in the future. Fdee new folders have been created. Some previous folders have been moved or removed.

The previous content of some folders has been moved to other locations. Release notes – Tekla Structures SP The rollover ссылка на страницу color of reference model objects is now transparent, and the objects behind reference model objects can be seen and selected. Release notes notfs Tekla Structures SP9. Drawing mark content text is now loaded correctly in all languages.

You can now separately refresh individual reference models. In Unitechnik export, the previous Turned to pallet option for Export meshes as tekla structures 2017 release notes free the Reinforcement tab has been renamed to Turned to pallet longest wire on X axis. In Unitechnik export, Turned to pallet bent wire on X axis is a new option for Export meshes as on the Reinforcement tab that exports meshes rotated to the pallet plane with больше на странице wires parallel with the X axis of the pallet.

Release notes – Tekla Structures SP8. Release notes – Tekla Structures SP7. The TDX point cloud file format is now supported. Snapping now works according to the selected structutes switch when adding level marks in a drawing.

Custom components and the autosave functionality have important fixes. There is a new Zoom selected command both in the modeling mode and in the drawing mode. The ribbon drop-down list behavior has been changed.

 
https://onlinepartners-company.com/vij
http://comuc.it/hee7
http://wemapac.com/yfr
https://paperplanes.com.ph/jqy9
http://australianvnc.cybertv.tv/mgha
http://lifelearningcenter.us/jzt
https://pensafe.ca/qha
http://oregarestaurant.com/ip97
http://toko-order.my.id/mvs
http://nizami.com/49y9
https://gueveadehumboldt.gob.mx/8jx5
https://miraclehemp.co/cioi
http://comparadoralarmas.mx/l5k
https://szfgsg.com/aqw
 

 

Tekla Structural Designer release notes | Tekla User Assistance

 

Analysis All rights reserved. This Software Manual has been developed for use with the referenced Software. Among other provisions, the License Agreement sets certain warranties for the Software and this Manual, disclaims other warranties, limits recoverable damages, deines permitted uses of the Software, and determines whether you are an authorized user of the Software.

All information set forth in this manual is provided with the warranty set forth in the License Agreement. Please refer to the License Agreement for important obligations and applicable limitations and restrictions on your rights. Trimble does not guarantee that the text is free of technical inaccuracies or typographical errors. Trimble reserves the right to make changes and additions to this manual due to changes in the software or otherwise. In addition, this Software Manual is protected by copyright law and by international treaties.

Unauthorized reproduction, display, modiication, or distribution of this Manual, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the full extent permitted by law. Trimble is a registered trademark or trademark of Trimble Inc.

Other product and company names mentioned in this Manual are or may be trademarks of their respective owners. By referring to a third-party product or brand, Trimble does not intend to suggest an ailiation with or endorsement by such third party and disclaims any such ailiation or endorsement, except where otherwise expressly stated.

Interoperability improvements. Tekla Structures introduces new features, improvements and other changes in NC file DXF converter, Trimble Connector, Tekla PowerFab export, Trimble Connect Visualizer, reference models and reference model performance, rebar set export, and point cloud properties.

Also direct links to analysis and design software have been updated. Updates in tools for automated precast fabrication. Improvements in components.

There are several improvements in concrete components and steel components in Tekla Structures Improvements in Template Editor, templates, and reports.

There are several improvements in separators, and enhancements in extending and trimming operations. Also, it is now possible to have 32nd and 64th precision in templates, reports, marks and dimensions in imperial units. Tooltip improvements. Tooltips for some of the frequently used ribbon commands, both in the modeling and in the drawing mode, now include example images.

Changes in advanced options. In Tekla Structures version , there are some new advanced options, and some of the advanced options have been deprecated. Also, the functionality of some of the advanced options has been changed. Changes in template attributes. Tekla Structures introduces some new and improved template attributes.

Administrator’s release notes: Reorganization of folders in the Tekla Structures installation folder. Tekla Structures includes some changes that are not compatible with previous versions. These changes require you to take action when you upgrade Tekla Structures.

The folders in the Tekla Structures installation folder have been reorganized to enable easier packaging of the product and new methods of delivering content in the future. Some new folders have been created. Some previous folders have been moved or removed. The previous content of some folders has been moved to other locations. Release notes – Tekla Structures SP9. Drawing mark content text is now loaded correctly in all languages. You can now separately refresh individual reference models. In Unitechnik export, the previous Turned to pallet option for Export meshes as on the Reinforcement tab has been renamed to Turned to pallet longest wire on X axis.

In Unitechnik export, Turned to pallet bent wire on X axis is a new option for Export meshes as on the Reinforcement tab that exports meshes rotated to the pallet plane with bent wires parallel with the X axis of the pallet. Release notes – Tekla Structures SP8. Release notes – Tekla Structures SP7.

Release notes – Tekla Structures SP6. The TDX point cloud file format is now supported. Snapping now works according to the selected snap switch when adding level marks in a drawing. Release notes – Tekla Structures SP5. Custom components and the autosave functionality have important fixes. There is a new Zoom selected command both in the modeling mode and in the drawing mode. The ribbon drop-down list behavior has been changed. There are improvements in copying properties in the property pane.

Tooltips are now visible for a longer time. You can now move and copy groups and sub-groups of shapes in the Shape catalog dialog box. Release notes – Tekla Structures SP4. You can now select the type of the export version in Export version type on the Parameters tab.

Rebar coupler : You can now define the coupler offset on the Parameters tab. Release notes – Tekla Structures SP3. Sandwich and double wall : you can now set more UDAs for a certain shell. Wall layout : you can select from the Main part layer list which layer part is set as the main part of the cast unit.

There are also new options for customizing the content of the UDA tab. Embedded anchors 8 : you can now select in Avoid reinforcement that all reinforcement types are detected in the main part. On the Placement tab, there are changes in the methods for calculating the center of gravity COG.

Hole reinforcements for slabs and walls 84 : you can specify which point of the slab will be taken as the origin where the creation plane starts. Concrete console , Concrete console : there are improvements on the Parts tab. Non-solid lines in drawings now have better representation.

The IFC2x3 export output file path is now longer. Export Unitechnik 79 has useful improvements: You can use quotation marks for object names consisting of strings with multiple words.

External definition file is a new way to control exported reinforcement. Tekla Structures extension manager has useful improvements. New steel components are introduced: Wooden purlin shoe 15 , Simple bolt connection 5 , and Windbracing 2 Rebar coupler and anchor tools have many improvements.

In Rebar shape manager , you can now compare selected bars to existing shapes. The name of your organization is now shown in the Tekla Structures start screen.

Splitting basic plates and slabs in the model is now easier. UDA search in Document manager has been improved. Texts in PDF reference models are now better covered. Layers are now available for objects in. IFC export property sets have been improved.

There are several improvements in concrete components. New Tekla Structures subscription offering and start-up changes. New Instructor side pane and other help changes. Tekla Structures introduces a new side pane window, Instructor , that shows instructions for the currently active ribbon command.

Instructor is available for all ribbon commands both in the modeling and drawing mode. Instructor shows content on selection, so the information is especially useful for giving advice to your users on choosing between different components or giving instructions before running a tool. The separate Tekla Help Viewer has been removed. The status bar at the bottom of the Tekla Structures window now has a new look, and many of the short instructions in the status bar have been improved.

Support articles are no longer restricted to maintenance users in Tekla User Assistance. Improvements in DirectX rendering. The option to turn off DirectX rendering has been replaced with an option to turn on the legacy OpenGL rendering.

There are new switches in the File menu to replace the previously used DirectX related advanced options. Batch editing of assemblies or cast units. In Tekla Structures , you can now quickly copy all edits from a source assembly or cast unit to specified target assemblies or cast units in one go.

The new tool Batch editor reduces the amount of repetitive work in situations where you need to edit identical assemblies or cast units by modifying the object geometry or by changing the part properties. Batch editor works with identical assemblies and cast units that have the same position number, or with very similar but differently numbered assemblies and cast units. New clip planes: View depth clip planes. If the model objects do not fit to the work area view depths, you can now create new view depth clip planes on the contextual toolbar.

Based on the view depth, you can, for example, easily isolate an entire floor from a building. View depth clip planes can be created both in native Tekla Structures models, as well as in reference models and overlay models. New blind holes and improvements in bolt holes. You can now model partial-depth holes that are used in aluminium curtain wall and light gauge steel construction, for example.

In the Bolt property pane, set Plain hole type to Blind and type a value for Hole depth. There are several other improvements and fixes in bolt holes. Reinforcement improvements. In Tekla Structures , all reinforcement modeling commands are collected on the Rebar ribbon tab. Rebar set guidelines and modifiers including splitters can now follow the leg face edges that are located between the guideline or modifier end points.

Use the new Follow edges setting to control this. There are many new settings and bar grouping improvements for rebar sets. Renewed shape catalog. The shape catalog has been renewed. It has a new user interface and many new features.

Improved reference model clash check. Clash check manager has been improved to better and faster find clashes in reference models. There are several improvements in concrete components and steel components. Improvements in custom component handling. There are improvements in the data lookup file fVF. The data files are now published with the custom components.

Custom component password protection has been improved. Part solid creation and also the overall performance have been improved. When you copy or move objects using the Copy or Move command, Tekla Structures now displays a preview of the new location of the copied or moved objects in the model.

This allows you to see the end result of copying or moving before picking the destination point for the copied or moved objects. You can now use the Enter key to complete commands. There are improvements in Linear array tool , Radial array tool , snapping, clip planes, property pane error messages, pour management, and surface objects.

Improvements in Trimble Connect Visualizer. Trimble Connect Visualizer now allows you to create your own materials, and override the materials of particular objects to use another material instead. The material appearances have also been improved. Drawing layout improvements. Tekla Structures introduces drawing-specific layouts, which allow you to make minor changes to the table sets in individual drawings without editing the drawing layout or creating new layouts.

Dimensioning improvements. Tekla Structures contains enhancements in dimension rules, dimension rule associativity, rebar dimension marks, rebar group dimensioning, and view level dimensioning. Drawing cloning improvements. The cloning of views, part marks, weld marks, and dimensions is now more reliable, and creates higher quality drawings.

The cloning is also faster. Other improvements in drawings. Tekla Structures introduces a large amount of improvements in drawings, including additions on the contextual toolbar in the modeling mode, new settings common for all views in a drawing, and enhancements in Document manager , Drawing content manager , zooming, and object level settings, and many more. Improvements in Tekla Model Sharing. Tekla Structures introduces several improvements to Tekla Model Sharing.

Improvements in Trimble Connector. Tekla Structures introduces several improvements to overlay models used with Trimble Connector. Among other new features, you can now view the changes between two overlay model versions, and work with overlay model objects in new ways. There are several new features and important improvements in the automated precast fabrication tools.

Tekla Structural Designer import and export. There are improvements in how different part types are imported and exported between Tekla Structures and Tekla Structural Designer. Other improvements in interoperability. Updates in Template Editor, templates and reports. There are also some new settings to control the rebar pull-out picture creation, an improvement in graphical field output, and new string functions for changing character case.

Furthermore, there are also some new template attributes, and some attributes have changed. There are some new advanced options, some advanced options have changed, and some have been deleted.

Tekla Structures introduces several new template attributes. Release notes – Tekla Structures SP There are improvements in Rebar shape manager in rebar recognition. There are improvements in Export Unitechnik 79 in exporting thermal anchors and mountpart name.

There are many improvements in concrete components. Sandwich and double wall has a useful improvement on the UDA tab. Rebar coupler and anchor tools have many useful improvements.

The IFC2x3 export output file path is now longer than before. There is a new way to control exported reinforcement. There are changes in sharing pour units. There is now better coverage for texts in PDF reference models. Trimble Connect Visualizer has updates in material appearances.

Pour objects now follow neighbor part object level settings. Base point accuracy has been changed in IFC2x3 export. Support for Sketchup version has been added.

Floor layout and Reinforced concrete stair 95 have been improved. Document manager has new quick access buttons for the Lock , Unlock , Freeze , Freeze off , Mark drawing ready for issuing , Unmark drawing ready for issuing , Issue , and Unissue commands. Rebar dimension mark placing has been improved. There are useful improvements in Document manager , printing, zooming, curved line accuracy in reference models,.

Show selected documents only mode and issuing work better now in Document manager. The order of drawings in the Print Drawings dialog box now matches the order they appeared in Document manager. Zoom to selected now works for templates in drawings. The accuracy of curved lines in reference models has been increased, and now there are four times more segments in curves. There are improvements in the following components: Precast found block and U. Base plate connection There are useful improvements in drawings, IFC2x3 export, keyboard shortcuts, rebar set modifiers and guidelines, and template attributes.

It is now faster to change object level settings in drawings. You can now easily synchronize your drawing sizes with the paper sizes that are used in printing. This way, you can ensure that the drawing sizes that you use for your drawing layouts are also available for printing.

The IFC2x3 export datetime property has been improved. You can now use new keyboard shortcuts to modify the part position of beams, polybeams, contour plates, and slabs, instead of using the Position options in the property pane or on the contextual toolbar. The keyboard shortcuts work for both native Tekla Structures parts as well as for analysis parts. When modifying rebar sets, you can now change the direction of splitters, modifiers, and guidelines. There are useful new features and improvements in rebar dimension mark properties, cloning, Rebar pull-out picture and marking , export, Tekla Model Sharing , and components:.

Rebar dimension mark properties now have their own dialog box in Tekla Structures. Having separate dialog boxes and settings files makes it easier to customize your rebar dimension properties, and still leave your other dimension properties unaffected. Cloning is now more reliable. The Rebar pull-out picture and marking application has a new section for Presentation options.

Tekla Model Sharing has been improved so that if you use a Trimble Connect folder as the project or firm folder, you can now see the progress of the data synchronization from the project or firm folder to the local model. There are several new features and improvements in the following components: Rectangular column reinforcement 83 , Edge and corner reinforcement 62 , Hollowcore reinforcement strands 60 , and Auto bolt. There are useful new features and improvements in pours, rebar sets, marks, and IFC export:.

The calculation of pour units has been improved to also attach non-solid items into overlapping pour objects. There are also improvements in pour calculation tolerance. There are improvements in rebar set splitters and in using rebar sets in custom components. You can now copy and move manually created detail marks and section marks.

Starting from Tekla Structures , the Steel Detailing configuration allows pour modeling if pours are enabled in the model. Easy creation of curved shapes: improvements in lofted plates and lofted slabs.

The creation of lofted plates and lofted slabs has been further enhanced. You can model even more complex curved shapes by using polycurve construction objects. Additionally, you can unfold lofted plates in single-part drawings.

Improvements in geometry editing and items. There are new ways to start geometry editing, to add and show item vertexes, and to create items and shapes using existing parts in the model. Changes in numeric snapping and other modeling improvements. There are improvements in numeric snapping. You can enter coordinate axis prefixes x , y , and z in the Enter a Numeric Location dialog box when you position or modify an object by using direct modification.

You can again create construction circles on the view plane by picking two points: the center point and a point to define the radius of the circle. In Task manager , you can now select from 13 predefined options how the date and time are displayed in a task. You can now adjust the toolbar size and at the same time the icon size on the toolbars.

There is a new handle dragging option on the contextual toolbar. There are small improvements in the side pane window docking and in the customization of the contextual toolbars. Collecting the usage data is on by default.

Small changes in the appearance of model and model objects. The DirectX rendered model views have been improved. Part edge lines are shown as dashed lines in transparent model views.

While this is written with the UK NA in mind, it is believed that the method would be acceptable to other NAs and so its use is extended to all currently supported NAs. Axial force is ignored and an appropriate warning issued if present.

The default limit is 2 degrees, but this can be edited by the User. Torsion restraint information is displayed for information only with the following assumed; Torsion – fully restrained; Warping – free.

Note that this applies to beam ends only – no account is taken of intermediate restraints from supported members. The new design applies for the following settings and circumstances; Characteristic; Beam. Single span beams.

Pinned end connections only. Check design only is supported but not auto-design. This includes loads applied by members connecting with the span and to both the torsion force and rotation limit checks.

When this is detected no checks are performed and a warning is issued. Note that web openings are beyond scope. Formerly, while it was possible to define plated sections and use them in a building, no design was undertaken. Scope: Characteristic of Beam and non-composite only are allowed. Single and multi-span continuous beams and cantilever spans are allowed.

As with rolled I-sections, the flexure class Slender is beyond scope, but axial class Slender is allowed. Web openings are not catered for. A proportioning limit check is introduced, based on Section F For the combined forces check, as for rolled I-sections, equations Ha and Hb are implemented; however the check is Beyond Scope for sections that fail the proportioning limit check noted above, whether any axial force is compressive or tensile.

Openings are defined in a simple and intuitive manner with real-time graphical confirmation of the opening dimensions and location s. Graphical icons indicate when the proximity of openings becomes too close and tooltips in the definition dialog guide the engineer with allowable dimension values.

Sections – Plated Sections – a number of improvements are made to the definition of plated sections: Previously it was not possible to select a plate of less than mm in breadth for the top or bottom flange of a plated I-section beam The manner of definition for Plated Beam and Column sections reverts to that prior to i – the overall section depth can now again be manually entered as any value rather than being selected from a drop-down list of fixed plate sizes in the database Beams – Composite Beams – the automated effective width calculation now ignores brace members when detecting the proximity of members which may limit the width , BIM Integration – Cellbeam Export: In some circumstances for curved beams supported purlin reaction loads were not exported to Cellbeam For the circumstance of loads applied by other means such as a connected column a warning is added on export that in addition to directly applied loads only reactions from supported transverse beams are considered Concrete Walls – Meshed Walls – this issue relates only to version Where beams connected to a wall between levels the beam analysis elements were not correctly connected to and supported by the wall mesh elements.

Rotation angle 2. Total rise 3. Twist angle at start 4. Twist angle at end For more information, see Create a steel spiral beam and Create a concretespiral beam. Tekla Structures i release notes 7 Spiral beams Spiral beams in drawings Spiral beams can be shown in drawings either folded or unfolded. In unfolded views, spiral beam is unfolded straight. In the following example, the Unfolded option is set to No: New dimensioning type and rotation angle in marks In view level dimensioning, a new Dimensioning type Spiral beamdimensions is now available.

The example below shows a straight dimension and a part mark that containsthe rotation angle information: Tekla Structures i release notes 9 Spiral beams The following example shows a radius dimension of a spiral beam: Tekla Structures i release notes 10 Spiral beams 1.

Tekla Structures i release notes 12 Modeling improvements You can now modify the dimensions of model objects even more quickly. The Display dialog box now has a new setting Cast in place parts with twooptions: Merged Tekla Structures i release notes 13 Modeling improvements Tekla Structures shows concrete parts as merged in the model if their castunit type is cast in place, if they have the same material grade and pourphase number, and if they touch or overlap one another.

Separated Tekla Structures shows concrete parts as individual parts and separated bytheir outlines. For more information, see View cast-in-place concrete structures. When you click Calculate pour units on the Concrete tab, Tekla Structures now attaches objects to pour objectsand creates pour units incrementally, which means that only the new andchanged objects are re-calculated.

Pour management has been improved in shared models and in multi-usermodels. When you create new pour breaks, they are not added to the currentphase, by default. Improvements in numbering In the Numbering Setup dialog box, you can now select whether the assembly name affects the numbering.

For more information, see Define what affects numbering and Adjust thenumbering settings. See also Changes in advanced options page Tekla Structures i release notes 15 Modeling improvements The position numbers are now kept better when there are conflicts innumbering. Tekla Structures i release notes 16 Reinforcement improvements In curved beams, polybeams, strip footings, and wall panels, Tekla Structuresautomatically creates three guidelines for longitudinal rebar sets.

For crossingrebar sets, Tekla Structures creates a polyline guideline with three points, and the midpoint has the Arc point chamfer. For more information, see Examples: Rebar sets in curved structures. Secondary guidelines of rebar sets improvedTo easily create secondary guidelines for a selected rebar set, you can now usethe new button on the contextual toolbar: To define if a secondary guideline inherits its spacing properties from theprimary guideline, select the secondary guideline and use the button onthe contextual toolbar.

Tekla Structures i release notes 17 Reinforcement improvements Rebar shape placing tool is available on the Concrete tab, under Rebar set. For more information, see Create a rebar set using Rebar shape placing tool. Tekla Structures i release notes 18 Reinforcement improvements For example: For more information, see Create a reinforcing bar group using Rebar shapecatalog.

You can also open the Layout editor in any of the following ways: Select and right-click an existing table in a drawing and select Open Layouteditor. Tekla Structures i release notes 19 Direct table layout editing – Quick and easy way toedit table layouts Double-click an existing table and select Edit drawing layout.

In the layout editor mode, the Layout editor pane is shown on the right. The Layout editor button on the right indicates that the Layouteditor is active. In Layout editor, you can: Tekla Structures i release notes 20 Direct table layout editing – Quick and easy way toedit table layouts Show the table names on the tables: Show hidden tables: Search for available tables. Refresh the tables templates in a drawing in layout editor mode and indrawing mode.

Move, re-anchor and rotate tables, and delete unnecessary tables. Anchor tables to a needed location and offset them from the anchoringpoint by moving them. Tekla Structures i release notes 21 Direct table layout editing – Quick and easy way toedit table layouts Save your changes by overwriting the current table layout, or by creating anew table layout with a new name.

When you save a new table layout it is saved inside the drawing layout, nonew files are created. For more information about the Layout editor, see Edit the layout directly ona drawing. Note that: Fixed sizes and calculated sizes mapping is available through the oldLayout dialog box only. View placement set-up: Margins and spaces can be set through the oldLayout dialog box only. The image below compares the old table layout editing with the new Layouteditor, and shows where you can find the old features in the new editor: Tekla Structures i release notes 22 Direct table layout editing – Quick and easy way toedit table layouts For more information about the old way of working with table layouts, seeCreate a new drawing layout, add table layouts and tables.

Whenyou do this: You cannot start editing templates or table layouts by double-clicking atemplate in a drawing. Tekla Structures i release notes 23 Direct table layout editing – Quick and easy way toedit table layouts 1.

Dimension rebars with Rebar group dimensioning application The Rebar group dimensioning application offers different styles forpresenting rebar group dimension lines and dimension marks flexibly. You can also define the content of the stirrup dimensionmarks: Tekla Structures i release notes 24 New tools for rebar dimensioning, marking andpull-out pictures On the Extra marks tab, create an extra mark in front of or behind thedimension line: Tekla Structures i release notes 25 New tools for rebar dimensioning, marking andpull-out pictures On the Advanced settings tab, define the offsets, spaces and cc distancesfor the stirrup dimension marks: Tekla Structures i release notes 26 New tools for rebar dimensioning, marking andpull-out pictures On the Rebar lines tab, define the generation settings and the appearanceof the leader lines belonging to the stirrup dimensions: For detailed instructions and examples, see Dimension rebars with Rebargroup dimensioning application.

Tekla Structures i release notes 27 New tools for rebar dimensioning, marking andpull-out pictures Add reinforcement marks with Rebar group marking application The Rebar group marking application offers different styles to create marksto rebar groups and distribution areas flexibly. On the Geometry tab, define the shape and position of the rebar mark,and mark line and leader line settings: Tekla Structures i release notes 28 New tools for rebar dimensioning, marking andpull-out pictures On the Mark 1, Mark 2, and Mark 3 tabs, define the content for the rebarmark, such as the diameter, and the cc distances.

You can have threeseparate marks with the desired content within one rebar mark: Tekla Structures i release notes 29 New tools for rebar dimensioning, marking andpull-out pictures On the Lines and symbols tab, define the generation settings and thelayout of the lines and symbols of the rebar mark: For detailed instructions and examples, see Add reinforcement marks withRebar group marking application. Draw rebar pull-outs with Draw rebar pull-outs application The Draw rebar pull-outs application creates exploded drawings ofreinforcement by using the settings defined in the Rebar pull-out picture andmarking application or in associative notes.

To Tekla Structures i release notes 30 New tools for rebar dimensioning, marking andpull-out pictures optimize flexible working with different types of drawings, use Draw rebarpull-outs together with Rebar pull-out picture and marking.

You can select: Reinforcement: Bending shapes are only created for the selected rebars. Parts: Bending shapes are created for rebars in the selected concrete part. Views: Bending shapes are created for rebars in the selected drawing view.

A drawing from the Drawing List: Bending shapes are created for rebars inthe selected drawings. Draw rebar pull-out pictures with Rebar pull-out picture and markingapplication With the Rebar pull-out picture and marking application you can visualizerebars by using bending shapes. Bending shapes can be positioned both Tekla Structures i release notes 31 New tools for rebar dimensioning, marking andpull-out pictures inside and outside the concrete shape.

On the Rebar tab, define the representation and the location of thebending shape, and the hook directions: Tekla Structures i release notes 32 New tools for rebar dimensioning, marking andpull-out pictures On the Marks tab, define the content, appearance and the position of themarks associated with the bending shape: For detailed instructions and examples, see Draw rebar pull-out pictures withRebar pull-out picture and marking application.

Speed improvements Some drawing templates were very slow to open. Earlier, the cancelling message box at drawing opening just showed that objects were rendered.

GA drawing cloning is now faster. Symbol with partial profile: Symbol length and locationnow adjustableYou can now adjust the length and location of the part symbol when you usethe part representation option Symbol with partial profile in drawing partproperties on drawing, view and object level: Adjust the length in the Length box.

The default value is mm. Adjust the location in the Offset from middle point box. The default valueis 0 mm. Example of using the default settings: Example after adjusting the length and the offset: Adjustable mark and text backgroundYou can now select whether to use opaque or transparent background in dimension marks associative notes drawing texts marks for parts, bolts, neighbor parts, levels, connections, reinforcement,neighbor reinforcement, surface treatment, pour objects The new setting Background mask is located in the properties dialog box oftexts, marks and notes.

Example of a part mark set to Transparent: Tekla Structures i release notes 34 Other drawing improvements Example of a part mark set to Opaque: Limitation: The background mask does not work for weld marks.

The new option is available for the following mark types: part marks Tekla Structures i release notes 35 Other drawing improvements neighbor part marks bolt marks surface treatment marks connection marks pour object marks associative notes Level marks in GA drawingsIn Tekla Structures i, level marks in GA drawings show the real level of thepart also in plane views XY views.

Placing improvements Weld marks are now be placed inside the part area regardless of the protection settings. Bolts are now protected on single bolt accuracy instead of bolt groupaccuracy. By default, the dimensions are visible. When the dimensions are visible, a small d is displayed on the status bar: For more information about hiding and showing drawing objects, see Show orhide drawing objects.

Dashed hardware lines are the first couple of lines in the line list: Tekla Structures i release notes 37 Other drawing improvements Now, these dashed hardware line types are again scaled by pixels by default,which means that they look the same in all zoom levels. Tekla Structures i release notes 38 Other drawing improvements New commands available in Project Viewer configurationThe commands Create section view, Create curved section view and Addlevel mark are now available in Project Viewer configuration drawings tohelp in studying the drawings.

Printing improvements Print preview hidden by default The print preview is now disabled by default. New way to show corrupted images in printouts Corrupted image files in drawings are now replaced by a rectangle and crossplaceholder in printouts. Printing from large models The speed of drawing printing and PDF output is no longer affected by the sizeof the model, so printing is now faster with big models.

Access external files in templates You can now access external files in templates. Tekla Structures i release notes 39 Template Editor improvements Value field rule allows you to define a file name and to pick a certainposition inside a file.

Example of a valid data file: fvfUse this function to find a value in the external file. CopyField The CopyField command copies values from any location.

You can copy a value from: Tekla Structures i release notes 40 Template Editor improvements a row to another row a sub-row to an upper row an upper row to a sub-row a row to a header a row to a footer a header to a row a footer to a row a Sum field Value field formulas Value field formulas now have similar options as row rule formulas. Tekla Structures i release notes 41 Template Editor improvements Support for multiple lines of text You can now enter multiple lines of text in the Text Properties dialog box.

Support for multiple lines of values You can now enter multiple lines of values in the Name field in the ValueField Properties dialog box. To get the end result to go to multiple lines press Enter at the end of therow. Organize data in columns You can now organize data in columns that start from top left, top right,bottom left or bottom right.

To use columns, select the Use columns check box,and then define the order: Tekla Structures i release notes 42 Template Editor improvements Content browser improvements You can now adjust the height of the Content browser pane located onthe left side of the Template Editor main window.

Tekla Structures i release notes 43 Template Editor improvements Refresh the work area The usability of moving graphical objects front or back is improved: whenitems are moved in Content browser, the changes are visible immediately. Sample templates You can now create a sample template, and save it for later use. To create a template of a template: 1. More characters allowed in formulas and rules The character limitation in formulas and rules is now characters.

You can define a specific prefix or suffix to be used in the file name. Set the project base point You can set one base point to be the project base point in one of the followingways: Tekla Structures i release notes 48 Base point improvements Select a new project base point from the Location by list in the Projectproperties pane. Tekla Structures i release notes 49 Base point improvements In the Base point dialog box, select a new project base point from the listat the top and then select the Project base point check box at the bottom.

Note that it is not recommended to change the project base point temporarilyduring a project. Base points in drawings You can now use base points in drawings: Tekla Structures i release notes 50 Base point improvements Base point data can be used in drawings on drawing and view level to setthe coordinate system. You can select the base in the Location by list on the Attributes 2 tab inview properties. To export the Excel file: In the Change detection section of the reference model side pane, click Export to Excel.

After this, define the needed Tekla Structures i release notes 51 New Excel export for reference model versionchanges settings in the Export data to Excel dialog box. When you are ready, clickExport. Template: Select a new Excel template for the export. Tekla Structures i release notes 52 New Excel export for reference model versionchanges Example of the exported Excel sheet when the Export details check box hasbeen selected. Tekla Structures i release notes 53 New Excel export for reference model versionchanges 1.

IFC4 contains the following new and improved features compared to theIFC2x3 export: In the IFC4 export, there are two new export types available: The Reference view is intended to support the referencing workflow,and the exported files can be used as reference files, and viewed in aviewer.

The dialog box has a new look and feel. All options are now on one page,not on several tabs. The basic functionality is the same as that of the IFC2x3 export. The Layer names as setting now supports also phases and attributes inaddition to part names.

You can export a default set of properties or a minimum set of properties: Default exports the default set of properties. You can export flat wide beams as plates. Rebars created by using the rebar set commands are not exported to IFC4. We do not recommend using IFC4 in production projects yet. Tekla Structures i release notes 56 IFC4 export and other IFC improvements If there is an error in the conversion, the object is marked as lila on theconversion list and in the model view: Tekla Structures i release notes 57 IFC4 export and other IFC improvements Converted objects appear as blue on the conversion list and in the modelview.

If you have attached a project, the project activity page is opened. If you have not attached a project,Trimble Connect main page isdisplayed. If you have not attached a project, Trimble Connect Projects page isopened. When you launch Trimble Connect: Trimble Connect opens, and you can attach a project if you have notdone that earlier. For more information about creating the markups, see Create markups inToDo notes. The markup toolbar contains the following buttons: removes all clip planes from all model views.

To add more UDA or Report attributes in your own attributes list, or addnew attributes to the Text markup attribute options list so that they areavailable for selection, click the Maintain text markup attribute options Tekla Structures i release notes 60 Trimble Connector and other interoperabilityimprovements button in the bottom-right corner.

The Text markup attribute optionsdialog box is displayed: Here you can select the UDA or Report attributes that you want to add inmarkups, and add new attributes using the options at the top. Tekla Structures i release notes 61 Trimble Connector and other interoperabilityimprovements Unitechnik 79 improvements You can now add spacer type information to the first layer of the reinforcement Unitechnik reinforcement type 1. The options are: Automatic: Calculates the spacer type automatically according to the coverthickness.

User defined spacer type: Enter the spacer type to be input in all firstlayer rebars. No: Leaves 0 as spacer type. Locking a shared model for investigation and deleting model versions It may sometimes be necessary to lock a model for investigation to identity amodel version that causes problems, and to find the last valid version. While the model is locked, the sharing commands in Tekla Structures areavailable as follows: The Read in and Write out buttons have yellow arrows.

For other users the sharing commands are not available. If a user of the shared model has already read in or writtenout any of the deleted versions, the Write out and Read in buttons have red arrows for the user, and the user needs to rejoin the model.

Reverting to a previous version It is also possible to revert to an earlier version of the model without furtherinvestigating the model. Improvements in Tekla Model Sharing performance andspeed Selecting sharing service at start sharing and joining a model When the on-premises sharing service is enabled, you need to activate theservice when you use Tekla Model Sharing for the first time.

Faster conflict resolution In Tekla Model Sharing, optimized model sharing conflict resolution is nowalways in use for components with many dependencies. Improved checking of incrementally shared databases The compatibility of incrementally shared databases is now checked whenopening a shared model. Improved performance for read in Tekla Model Sharing performance has been improved when reading in manypackets in a model that contains a large number of files. The following objectproperties have been added to the Custom component browser: Rotation angle Total rise Twist angle at start Twist angle at end You can bind spiral beam handles to a plane.

Tekla Structures i release notes 65 Component improvements You can also link variables to the spiral beam object properties. For example: Tekla Structures i release notes 66 Component improvements For more information on spiral beams, see Create a steel spiral beam andCreate a concrete spiral beam. Tekla Structures i release notes 67 Component improvements Concrete components Wall layout Wall layout tools is a set of components that you can use for creating andmodifying all common types of concrete walls, such as solid precast panelsfrom single layers to double walls and sandwich walls, and different wallstructures that are cast on the site.

Floor layout Floor Layout creates floors built of precast filigree and hollow core slabs. Rebar end trimming Rebar end trimming has been changed so that now it is possible to modifythe end covers of rebars that have end anchors created with Rebar endanchor.

By selecting Yes inthe Get free gap from auto attribute file option, you can control the anchor Tekla Structures i release notes 68 Component improvements offset with the attribute tables. Other improvements You can now bind bent plate handles to a plane in custom components. This advanced option is located in the Numbering category in the AdvancedOptions.

 
http://pcktsqre.com/y70
https://themarketingadvisor.com.au/4g2w
https://pcsbd.xyz/wh77
https://medicmesir.com/1cim
http://dusbd.com/u5ir
https://text.mnpcbd.com/jd3b
http://dhdtrading.com/2pu
https://2ts-engineering.by/ghhd
https://knowledge-it.ca/he73
https://rosstrust.org.au/sb0i
http://spc-cmr.com/ttcs
https://gamestarted.com/7t1n
http://sdillon.co.uk/vlrl
https://thunderbird-films.com/pbva